How to get PSN Games running On Rogero CFW 4.21 V1.09d (Final)

[Tweak]

I just updated from 3.55 kmeaw to Rogero 4.21 v1.09 (Final) and had a Whole Bunch of both PSOne PSN Games And PSN Retail Games like Beyond Good and Evil HD, Sonic The Hedgehog Episode 1,Xmen Arcade etc still installed....

I had to Reinstall the crack/fix.pkg's for the PSone PSN Games to Run again,
but the Retail PSN Games mainly duplex's 3.55 PSN Games with fixes gave me a 8000xxxxxxxx Error. Because I did not want to lose all my psn games since updating to 4.21 cfw I managed to may them work

You will need
1. PkgView
2. 4.21 EBOOT Resigner
3. PKG ContentID
4. psn_package_npdrm

Here is the fix for 4.21 cfw part

1. Run PkgView_1.3 ON your PC Drag the game crack.pkg into the program, right click on the folder and press extract to source folder.

(Note: Must be the crack/fix pkg (usually smallest pkg file size) this is the pkg that will fix the PSN games for the 4.21 cfw)

2. After the Package has Extracted find the Eboot.bin in the USRDIR Copy it over to the 4.21 EBOOT Resigner Folder

3. launch the 4.21 EBOOT Resigner, press 2 On Keyboard then enter than enter again

4. You will be asked to enter the content-id of the application

5. Open pkg ContentID Program, load the pkg, once you do you will see your Content-ID , copy it then go back into the 4.21 EBOOT Resigner program and paste the Content-ID and hit enter,

(example TMNT Turtles In Time ReShelled ContentID is SET043-NPUB30107_00-TMNTRESHELLED001)

6. Once the 4.21 Eboot Resigner is done copy/paste the new eboot.bin back into the extracted crack/fix usrdir folder and replace the eboot.bin with the new one.
then move the extracted pkg folder into the psn_package_npdrm folder

7. Go to the psn_package_npdrm folder open the package.config file in notpad (if there is not one make a new text document and rename it to package.config

it should look like this except for the content-id you will need your Content-ID of the game your editing currently from the pkg ContentID Program you obtained earlier in step 5

Content-ID = 00000000000000
K_licensee = 0x00000000000000000000000000000000
DRMType = Free
ContentType = GameExec
PackageType = HDDGamePatch
PackageVersion = 01.00

8. save the package.config close it

9. hold shift on keyboard and right click on mouse anywhere in the psn_package_npdrm folder select open command window here.

10. A cmd window will open copy and paste
psn_package_npdrm.exe package.conf BLND00001
(Note: where BLES01467 is the id of your game example NPUB30107)

11. hit enter and psn_package_npdrm should make a new pkg with the resigned eboot.bin

12. install game pkg's in this order
1. install.pkg
2. crack.pkg
3. the .pkg you just created

if everything went right your 3.55 psn game now runs on 4.21 cfw with no 8000xxxxxxxx errors

This post was deleted by Darty17 on Sun Oct 28, 2012 7:34 am.

[Antix]

Great! Was looking for this for games I hadnt installed.

You can cut out a few steps if you had installed the package already on 3.55

if you have the pkg file, grab the Content-ID from it as per your instruction above.

Find the install folder under /dev_hd00/game/ and copy out the EBOOT.BIN file.

Then follow your steps to resign the EBOOT.BIN. Copy it back into the same folder you grabbed it from on the PS3...

That is it, all done. At least it worked on the one that I tried. saves extracting the package and then putting it back together again.

[Tweak]

Great! Was looking for this for games I hadnt installed.

You can cut out a few steps if you had installed the package already on 3.55

if you have the pkg file, grab the Content-ID from it as per your instruction above.

Find the install folder under /dev_hd00/game/ and copy out the EBOOT.BIN file.

Then follow your steps to resign the EBOOT.BIN. Copy it back into the same folder you grabbed it from on the PS3...

That is it, all done. At least it worked on the one that I tried. saves extracting the package and then putting it back together again.

true but I did the pkg route for guide for people like me who want to backup/archiving purposes

[KentaZX]

Ive tried these steps on several PSN games and they all work perfectly so far!

Can this help for DLCS as well?

[litas]

Hi friend i´ve follow your tutorial and on cmd windows i write this
psn_package_npdrm.exe package.conf NPUB30024
(the game i want is 1942:Join Strike)
and a error message appers, it says:
»!ERROR!: NPUB30024/USDIR/EBOOT.BIN is not a supported NPDRM SELF. (already a Illegal Package: USRDIR/EBOOT.BIN is required.
Registration error.

Can u help mee please?

[KentaZX]

Check your config file in notepad and make sure everything is right according to the one given in the tutorial and make sure the content ID is the ID that you obtained after using the pkg content ID program. I got that error message before and thats how i fixed it. Remember to read all of the tutorial and carefully, otherwise youll get errors like registration error.

[litas]

I've tried many times and still does not work.
You can post here your notepad and your PSN_Package_NPDRM to try again.

Thank you.

[KentaZX]

whats in my notepad and for NPDRM part is the SAME thing as this tutorial provides, the ONLY difference for each game you fix is the CONTENT ID of your game/fix that you need to paste in the config file, and when your typing the command in the CMD window, you change the title ID into your game's title ID.

[litas]

whats in my notepad and for NPDRM part is the SAME thing as this tutorial provides, the ONLY difference for each game you fix is the CONTENT ID of your game/fix that you need to paste in the config file, and when your typing the command in the CMD window, you change the title ID into your game's title ID.

Yes, i Know, but the error to me is for the NPDRM, i think.
If you put your files, maibe i can do it.