• Dehashing/Syscon Reset Tutorial for Downgraded Consoles • Rogero - Tortuga Cove
    Register

    Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Moderators: Rogero, bitsbubba

    { VISITS } Views: 180989  Favorites Favorites: 0  Followers Followers: 7 
    Followers: dukefleedo, quazza, freestylemaster, kokotonix, tscott, Nino_Z, mysterio
    Developer
    User avatar
    Posts: 598
    Joined: Mon Jul 04, 2011 11:07 am

    Has thanked: 330 times
    Been thanked: 1750 times
    Reputation point: 1387
    Sensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of Knowledge

    Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby Rogero » Mon Oct 22, 2012 6:08 pm

    for all owners of PS3 consoles downgraded from 3.55+ using hardware flashers and Rogero_CFW_v3.x

    To "Dehash the PS3" (Reset the syscon) and have the PS3 back to normal safer mode like any original ( non Downgraded ) PS3, here are the steps :

    1- After completing the downgrade process and having Rogero CFW 3.x up and running, make sure you have the Blu-Ray drive attached or the QA Toggle package won't work.
    2- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
    3- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
    4- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear one Beep and the PS3 will Restart back to XMB.
    5- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

    L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

    You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

    6- Now that you have QA flag set, Turn Off your PS3 and Turn it back on but into "Recovery Menu"

    This Step is very important, it have to be from "Recovery Menu" and not a normal Update from XMB or the PS3 will Brick.

    Here is how to access it:
    a. Turn off Playstation®3.
    b. Turn it on and keep Holding The power button down; The system will turn on and turn off once again.
    c. Once the System has been shutdown, Turn it on again and keep Holding The power button down (you will hear 1 beep first, keep holding) until you hear 2 consecutive beeps
    d. When you hear the 2 beeps take finger off power button.
    e. You will be prompted to plug in your controller via usb and then hit the PS button
    f. The Recovery menu will pop up.
    g. Last Option #6 is what you must use "System Update"

    Alternatively you can simply use CondorStrike's Updater package to enter Recovery Menu directly from XMB without going through the boot sequences. --> Condor Updater v2.0

    7- Now you must have any 3.55 OFW or CFW with original (non Patched) LV1 in your "USB:\PS3\UPDATE\PS3UPDAT.PUP", here's a link to 3.55-Kmeaw --> kmeaw355.PUP

    8- Select the last option of the Recovery Menu --> System Update, then when prompted press and hold "Start+Select" for 5 seconds to start the update.

    Once finished the PS3 will restart into XMB with the Syscon hashes reset back to 3.55 in both "ros0" and "ros1" and your PS3 is back like any original/non Downgraded PS3 that can use any CEX/DEX Fw without having to worry about disabling LV1 checks.
    It is not the years in your life that count. It is the life in your years.

    Member
    Random avatar
    Posts: 129
    Joined: Mon Oct 22, 2012 3:55 pm

    Has thanked: 4 times
    Been thanked: 56 times
    Reputation point: 7
    Novice

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby rob1980 » Mon Oct 22, 2012 6:50 pm

    2 questions :)


    1, If somebody is currently on kmeaw, or OFW 3.55, does that confirm the LV1 is not patched, and rule out needing to do this?

    Does this format the HDD?

    Thanks

    Rob

    Member
    Random avatar
    Posts: 3
    Joined: Mon Oct 22, 2012 8:48 pm

    Has thanked: 0 time
    Been thanked: 1 time
    Reputation point: 0
    Newbie

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby j12 » Mon Oct 22, 2012 8:51 pm

    Hello, the link for the download "kmeaw355.PUP" is broken. Would you kindly put it back up please? Thanks.

    Member
    Random avatar
    Posts: 1
    Joined: Tue Aug 07, 2012 4:25 pm

    Has thanked: 0 time
    Been thanked: 1 time
    Reputation point: 0
    Newbie

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby raverman72 » Mon Oct 22, 2012 10:59 pm

    juste click right on link and select save for download kmewah 3.55
    by
    e

    Member
    Random avatar
    Posts: 4
    Joined: Tue Oct 23, 2012 6:46 am

    Has thanked: 0 time
    Been thanked: 4 times
    Reputation point: 0
    Newbie

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby h0baz » Tue Oct 23, 2012 6:54 am

    Hello guys!!

    I have done everything,but my problem is when I went to recovery mode and I start to update the ofw 3.55 not cfw

    can't update it gave me (No applicable update data was found)

    Please help me...

    Site Admin
    User avatar
    Posts: 1354
    Joined: Thu Jun 30, 2011 3:27 am

    Has thanked: 69 times
    Been thanked: 756 times
    Reputation point: 284
    NoviceNoviceNovice

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby S4BRE » Tue Oct 23, 2012 8:49 am

    and you have the update pup named PS3UPDAT.pup
    and on your usb like
    PS3/UPDATE/PS3UPDAT.PUP
    Image
    Tortuga Cove Administrator

    Member
    Random avatar
    Posts: 5
    Joined: Tue Oct 23, 2012 8:11 am

    Has thanked: 0 time
    Been thanked: 2 times
    Reputation point: 0
    Newbie

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby joaozinhow15 » Tue Oct 23, 2012 9:13 am

    My ps3 after downgrade can´t change the CFW beacause she bricks .

    If i make this tutorial i can change the CFW everytime ?

    The link of kmeaw is off , someone can put here the file please ?

    tnks you ;)

    Member
    Random avatar
    Posts: 2
    Joined: Mon Oct 22, 2012 4:03 pm

    Has thanked: 0 time
    Been thanked: 2 times
    Reputation point: 0
    Newbie

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby deathsong » Tue Oct 23, 2012 2:29 pm

    hi Rogero

    dead link for kmeaw3.55 reload please :roll:

    Member
    Random avatar
    Posts: 4
    Joined: Tue Oct 23, 2012 6:46 am

    Has thanked: 0 time
    Been thanked: 4 times
    Reputation point: 0
    Newbie

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby h0baz » Tue Oct 23, 2012 3:41 pm

    S4BRE wrote:and you have the update pup named UPDAT.pup
    and on your usb like
    /PS3/UPDATE/UPDAT.pup


    I did it but still the same problem

    Member
    Random avatar
    Posts: 2
    Joined: Tue Oct 23, 2012 4:35 pm

    Has thanked: 0 time
    Been thanked: 1 time
    Reputation point: 0
    Newbie

    Re: Dehashing/Syscon Reset Tutorial for Downgraded Consoles

    Postby Orange » Tue Oct 23, 2012 4:37 pm

    Followed the instructions here, but after transfering the update data and restarting into the screen where it should apply the update, it says ""The latest version of the system software is already installed. There is no need to update." Tried with both 3.55 OFW and 3.55 kmeaw, same thing with both. I'm on 3.55 Rogero V3.7 at the moment.

    edit: Oh, my bad, was caused by a BD in the drive. Took it out and worked fine.

    Next

    Return to Rogero

    Who is online

    Users browsing this forum: Yahoo [Bot] and 6 guests