Corona 16Mb Firmware and upgrade diagram for Glitcher II is available!

[steveo1978]

Hello!

We are happy to release a Firmware upgrade and diagram to enable every
Matrix Glitcher II ever produced to work with the Corona 16MB.
We are now working on the Corona 4 GB and hope to have something ready in
few weeks.

The upgrade Firmware V1.5 and installation diagram for the Corona 16 Mb is
now available in the DOWNLOAD area of our website:
http://www.infinitymod.com/download.html

or you can download the complete ZIP package HERE:
http://www.infinitymod.com/Download/MG2-CORONA16MB.zip

All the best,
Matrix Team 2012!



Here is a quick switch settings chart for Matrix Glitcher 2 with the latest firmware v1.5.

SW 1 2 3 4
ON ON ON ON ZEPHYR
ON OFF ON ON FALCON
ON ON OFF ON OPUS
ON OFF OFF ON JASPER
ON ON ON OFF TRINITY
ON OFF ON OFF PHAT RGH 2.0
ON ON OFF OFF CORONA
OFF OFF OFF OFF UPDATE MODE


Source

[Naper360]

Thanks, this is good news, since I have a lot of those chips.

Rigth now I'm trying a RGH 2.0 on a 16mb Jasper.
My question if I can use the matrix tunnig application and with what values, the RGH2 is working but takes 5 minutes almost every time.

[gurbik]

According to picture Corona needs new part - 48 MHz Crystal Oscillator.
Does anybody know - will 5032 model sold on Ebay work for it?
Inputs 1,2,3,4 shown on picture with Oscillator do they match exactly those of Oscillator:
1 - TriState/NC
2 - GND
3 - Output
4 - VDD

Thanks in advance.

[Vey]

Thanks, this is good news, since I have a lot of those chips.

Rigth now I'm trying a RGH 2.0 on a 16mb Jasper.
My question if I can use the matrix tunnig application and with what values, the RGH2 is working but takes 5 minutes almost every time.

Possible to show us how you glitch your 16mb Jasper?

[Vey]

Any guide on how to dump the nand of corona with Mtx SPI Nand Flasher?

[XDK]

Any guide on how to dump the nand of corona with Mtx SPI Nand Flasher?

use J-Runner application by Team-xecuter

"nandpro" is not yet updated to corona flash config but J-runner and AutoGG are !

[axiommods]

can i use the team-xecuter files on my matrix glitcher v1 if I add the 48mhz crystal osc?????

Thanks.

[XDK]

can i use the team-xecuter files on my matrix glitcher v1 if I add the 48mhz crystal osc?????

Thanks.

I see no reason why u cant.