Jasper512 RGH Boot Timing Is 30, 40Min Help

[DjVirus]

Hello Gay i have Make Many Xbox Console In RGH Or Jtag
But i Have Jasper 512 With 2 Bad blocks This time I Have Also Success But Only 1 Mistake The Time Of Booting the Console Is 5 to 10 min
I Have Change The Pf 331 Value Or Change The IC Matrix GLITCHER Or wiring But This time The Booting time Is more Late in 30 to 40 min Plz Help Me How to Solved

[S4BRE]

check wire length, also are you sure it mins not secs ?

[nice69]

first, we're not gay, you are
second, what is your dashboard version?
third, use matrix glitcher with 100nF capacitor tied to PLL_BYPASS and GND (assuming your dashboard is below 14719)
fourth, if it's not working i need a video of it (showing debug led) to solve your problem

[DjVirus]

1st I M Sure Its Min or
2, I will All Do This Types Of Trick My Dash Is 13599 (CB6750) And I m Try 3 Times New Wiring
but cant do any thing

[Vey]

Have you solved the timing yet?

[DjVirus]

No bro

[Vey]

Remove whatever external capacitors you install. Try this cap trick:

http://i1078.photobucket.com/albums/w49 ... AG0047.jpg

I have tested on 3 Jasper 512 and 2 works. Boot time under 10 secs. Only the 3rd jasper doesnt work. Dont know why. Let me know if this trick solve your timing problem.

[DjVirus]

But I have Using Matrix Glitcher 1 Ic Not Glitcher 2 Is There 1 ic Trick

[shammisidhu]

My jasper 512 mb dashbord 14719 not booting I have Using Matrix Glitcher 1 Is Not Glitcher 2 Is There 1 ic trick if you have any trick plz tell me dear

[Denis®]

If it's Matrix Glitcher 1, not2, try programming it with coolrunner RGH2.0 FALCON firmware. Has been reported to work.