360 Multi Builder for all Xbox360 Image Types

[radems]

Thank you for reply Nico-Arg.

When reding nand
Error: 250 reading Block 2BC
when writing
Error: 202 Programing Block 2BC
What about remaping nand?

I used old dump after updated 14699 to 15574.

from 360 dump tool v0.97
bootloader section
2BL to 4BL: 9231,9231,9231 LDV 0
5BL 1888
6BL 15574 LDV 3
7BL 15574
6BL 14699 LDV 2
7BL 14699
CFDV should be 4, right?

First I try retail without RGH Chip but red central led after 10 seconds
then with RGH chip boot normal in glitch dashboard 15574.
Why retail image without chip doesn't boot?

BR

[Nico-Arg]

Hi there,

When reding nand
Error: 250 reading Block 2BC
when writing
Error: 202 Programing Block 2BC
What about remaping nand?

Not needed, at this moment.

First I try retail without RGH Chip but red central led after 10 seconds
then with RGH chip boot normal in glitch dashboard 15574.

Let me understand this part. If you use your RGH chip + the new RGH Image, your xbox is glitching and working properly?
If Yes, turn your machine using the Eject Button and check how many F do you have in line 7 of fuses.

Cheers,

[radems]

Yes with RGH chip + the new RGH Image xbox working properly.
Reflashed with RGH image and reconected RGH chip, boot Xell
fuseset 07: ff00000000000000 is same as original fusedump before
update to dashboard 15574.
I would like to restore to retail and deinstall RGH
but without working retail image I can't.

[Nico-Arg]

Yes with RGH chip + the new RGH Image xbox working properly.
Reflashed with RGH image and reconected RGH chip, boot Xell
fuseset 07: ff00000000000000 is same as original fusedump before
update to dashboard 15574.
I would like to restore to retail and deinstall RGH
but without working retail image I can't.

Great, ok fuseset 07: ff00000000000000 . PLEASE BE SURE THERE ARE TWO FF.
Recheck that.

Then start all over from step 6 , to create a Retail Nand Use your original NandDump (with out any modifications)
6- Change cfldv = to cfldv =2 (Your two FF displayed on Xell Reloaded)
7- Create Glitch Image.

Then write the image with nandpro usb: -w16 retail_image.bin
This should work, if not , create a retail Image 14699 using Multibuilder 0.92

Remember that your LVD value is 2 .

Let us know how was it.

[radems]

Resolved!
After remove RGH chip
I try MB 0.95a set cfldv = 2 in option.ini
original nand 14699 and pre 14699
then with MB 0.92 set cfldv = 2 in option.ini
original nand 14699 and pre 14699
I use always retail image build in MB reflash nand but
always red led after 10s+ so no boot with this 4 image.

I Download xeBuild Gui v2.081 open original nand D14699,
open cpu, fuse, set retail build type, set trinity MB, set kernel
to 15574, generate new image, reflash a new generated
retail image and xbox boots without
RGH chip conected normaly in D15574.

[Nico-Arg]

Glad to know you solved it

Cheers!!

[radems]

Thank you for help Nico-Arg,
before trying xeBuild Gui I try also
cfldv = 3 in MB but always red dot.
After successful updated with retail image
I also updated avatar with
normal system update 15574 on USB.

[Nico-Arg]

Thank you for help Nico-Arg,
before trying xeBuild Gui I try also
cfldv = 3 in MB but always red dot.
After successful updated with retail image
I also updated avatar with
normal system update 15574 on USB.

I only use MB and never had a problem to recover console with wrong LVD, but is good to know that xeBuild Gui is a valid tool too.
The only Valid LVD information that you can always trust is the one displayed in Xell Reloaded

Never trust in any nand dump.

Cheers!

[SMC_MESS]

Hi all.

I'm trying to update my jtag from 13599 to 15574 on my Falcon. The problem is my wiring is AUD CLAMP + DVD TRAY, but even if I select that option in 360MultiBuilder, I got a nand without the "dvd tray part". I mean I got a nand like if I select AUD CLAMP (only).

I checked the nand with smc comparision and this is what I got:

Code: Select all

: comparing updflash15574-full.bin and FreeBOOT13599_remapped.bin
                                image1 | image2
              ------------------------ | ------------------------
        file:   updflash15574-full.bin | FreeBOOT13599_remapped.bin
          CB:                     5770 | 5770
          CF:                     4532 | 4532
          CG:                    15574 | 13599
hacked SMC?:                        1 | 1
         TMS:                AUD_CLAMP | AUD_CLAMP
         TDI:                    DB1F1 | TRAY_OPEN
     PCI Bug:                not found | not found

The second one is my old/currently nand.

Looking in "Data\my360" I see that falconaud.bin and falconfull.bin are the same file [CRC:8E5711CB]. I guess that is the problem? Any chance of an update or some istruction on how I can create the nand correctly with both AUD CLAMP and TRAY OPEN ?

[TheOner]

Hi,
I have x360 Slim Trinity and X360 Glitchip v2.1. I soldered nand flasher to mobo, and dumped nand couple of times. Then i compared those, and they matched and i went further. I used multibuilder with dump and it says this:

Code: Select all

Checking the file nanddump.bin, Please wait...

* found flash image, unpacking...
ECC'ed - will unecc.
Found 2BL (build 9231) at 00008000

[CB] version [9231] found !!

This CB version is not compatible with the Glitch Hack currently...

The Xell/ECC image won't be created

Press any key to continue . . .

But MultiBuilder says in first page that "- Added Trinity boot-loader ver 9231 to allow for 15574 Retail Image Creation.". So why it is not compatible?

edit: I checked that my mobo has HANA chip.