How to capture video from Dev Unit

[XDK]

Please note that the xbox 360 SDK is required to use this function

Launch : Xbox 360 Command Prompt

Enter : xbmovie /X:123 /F:111 yourvideo.wmv


Replace 123 by YOUR IP (dev kit IP)


Replace 111,by the quality you choose :

F1: HD 8mbps 720p30; 384Kbps 5.1 surround
F2: HD 8Mbps 720p30; 192Kbps stéreo
F3: SD 1395Kbps 360p30; 96Kbps stereo
F4: Stream high: 542Kbps 180p30; 64Kbps stereo
F5: stream low: 42Kbps 136p15; 16Kbps moni
F6: HD 15Mbps 720p60; 384Kbps 5.1 surround

EXAMPLE : xbmovie /X:192.168.1.83 /F:1 trailer1.wmv








Original Source: Assembler Games User: itchy
Source http://www.assemblergames.com/forums/sh ... hp?t=28328
I take no credit in this post, all post credit is given to the site/post/user which posted the information..

[S4BRE]

just to add IT TAKES TIME BE PATIENT! LOL

[juggahax0r]

Instructions:
1. Edit the Xbmovie.bat file to match your systems setup and change the /F: option to the quality you want based on the instructions above.

2. Have the SDK installed in the default location.

3. Create a dummy.wmv named whatever you want the resulting video file to be named.

4. Drop your dummy.wmv file onto the .bat file.

5. Press enter to initiate the capture , press again to stop and wait for it to finish processing.
Downlload :
Xbmovie batch file

[S4BRE]

Instructions:
1. Edit the Xbmovie.bat file to match your systems setup and change the /F: option to the quality you want based on the instructions above.

2. Have the SDK installed in the default location.

3. Create a dummy.wmv named whatever you want the resulting video file to be named.

4. Drop your dummy.wmv file onto the .bat file.

5. Press enter to initiate the capture , press again to stop and wait for it to finish processing.
Downlload :
Xbmovie batch file

nice one +rep

[x23are]

hello guys.
can anyone help me??? i flashed rgloader 0.295 image to my rghed falcon.
i try this tut in this topic but i cant capture a video from my screen. i type this on 360 cmd:
xbmovie /X:192.168.1.3 /F:1 test.wmv
but no result.

[S4BRE]

Instructions:
1. Edit the Xbmovie.bat file to match your systems setup and change the /F: option to the quality you want based on the instructions above.

2. Have the SDK installed in the default location.

3. Create a dummy.wmv named whatever you want the resulting video file to be named.

4. Drop your dummy.wmv file onto the .bat file.

5. Press enter to initiate the capture , press again to stop and wait for it to finish processing.
Downlload :
Xbmovie batch file

just use this
also dont try going to you menu while recodring it breaks the recording process.

[x23are]

i take a capture from my problem:

!	S4BRE wrote:
	Your link has been removed, upload a screenshot or video not and EXE we are not dummies.

anyone know whats my problem???