Error to create ECC file

[rafilks]

I came across this week with a difficulty to generate the file. ECC

I own a:

xbox model: PHAT
Motherboard: Jasper
Memory: 512MB
Dashboard: 14719

I purchased a card Matrix SPI Nand Programmer + Glitch 2

I did all the initial steps (Setup Programmer drivers nandpro 2.0e). All working and recognized.

I ran the command to extract the Matrix SPI Nand 512 with the parameter indicated in the manual InfinityMod -64 to Matrix SPI Nand the size of mine. Two blocks in the process had the message "Block error", but according to several texts I found, this is normal.

In possession of the extracted file twice and compared, I tried to generate the ECC. The Multi Build software is report that the build version of my CB 6753 is incompatible, and the package "py" also download on the InfinityMod site does not work. Anybody have a solution?

[Nico-Arg]

Hi there, your issue is - Dashboard: 14719

You Need RGH v2 intead of RGHv1 (Multibuilder is RGH1 based)
You can use xebuild o xebuildgui and recall that you can not use the same jed/xsvf files, you need the new ones.

cheers!

[S4BRE]

!	S4BRE wrote:
	do not double post, i deleted your other post.....

[rafilks]

Ok. I'll try.

But I followed the steps of InfinityMod's tutorial

[rafilks]

Hi there, your issue is - Dashboard: 14719

You Need RGH v2 intead of RGHv1 (Multibuilder is RGH1 based)
You can use xebuild o xebuildgui and recall that you can not use the same jed/xsvf files, you need the new ones.

cheers!

I tried, but other errors appeared

see the log file:

=================================
Swizzy's xeBuild GUI version 2.03
Log Started: Friday 04/05/2012 13:55:47
==================================

*** Some console information ***
CB Version: 6753


Copying nand to ecc directory, this may take a while... Done!

Parameters sent to python:

build.py nanddump.bin cd\CDjasper xell-gggggg.bin

Building nand using build.py (this may take a while):

* found flash image, unpacking...
Traceback (most recent call last):
ECC'ed - will unecc.
File "build.py", line 457, in <module>
Found 2BL CB_A (build 6753) at 00008000
if check_CB_Build(build(CB_B)):
Found 2BL CB_A (build 6753) at 00009fc0
File "build.py", line 442, in check_CB_Build
Found 4BL CD (build 6753) at 00013680
assert found, "Can't Glitch that CB"
Found 5BL CE (build 1888) at 00018700
AssertionError: Can't Glitch that CB
* found decrypted CD
* found XeLL binary, must be linked to 1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6753
CB_B: 6753
EXT_CB_A: missing
EXT_CB_B (decrypted): missing
EXT_CB_B (decrypted): missing
CD (image): 6753
CD (decrypted): 8453
* decrypting...
* checking if all files decrypted properly... ok
* checking required versions... ok
* patching SMC...
* patching Jasper version 2.3 SMC at offset 0x12ba... done!
* this image will be valid *only* for: Jasper
* patching CB_B...
ERROR: Unkown error, check the log!
ERROR: There was one or more fatal errors: 1 errors during the build process
Cleaning data and temporary directories... Done!


****** The app has now finished! ******

[Nico-Arg]

Can you upload your Nand?
I will give a try.

[Nico-Arg]

Hi there, your issue is - Dashboard: 14719

You Need RGH v2 intead of RGHv1 (Multibuilder is RGH1 based)
You can use xebuild o xebuildgui and recall that you can not use the same jed/xsvf files, you need the new ones.

cheers!

I tried, but other errors appeared

see the log file:

=================================
Swizzy's xeBuild GUI version 2.03
Log Started: Friday 04/05/2012 13:55:47
==================================

*** Some console information ***
CB Version: 6753


Copying nand to ecc directory, this may take a while... Done!

Parameters sent to python:

build.py nanddump.bin cd\CDjasper xell-gggggg.bin

Building nand using build.py (this may take a while):

* found flash image, unpacking...
Traceback (most recent call last):
ECC'ed - will unecc.
File "build.py", line 457, in <module>
Found 2BL CB_A (build 6753) at 00008000
if check_CB_Build(build(CB_B)):
Found 2BL CB_A (build 6753) at 00009fc0
File "build.py", line 442, in check_CB_Build
Found 4BL CD (build 6753) at 00013680
assert found, "Can't Glitch that CB"
Found 5BL CE (build 1888) at 00018700
AssertionError: Can't Glitch that CB
* found decrypted CD
* found XeLL binary, must be linked to 1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6753
CB_B: 6753
EXT_CB_A: missing
EXT_CB_B (decrypted): missing
EXT_CB_B (decrypted): missing
CD (image): 6753
CD (decrypted): 8453
* decrypting...
* checking if all files decrypted properly... ok
* checking required versions... ok
* patching SMC...
* patching Jasper version 2.3 SMC at offset 0x12ba... done!
* this image will be valid *only* for: Jasper
* patching CB_B...
ERROR: Unkown error, check the log!
ERROR: There was one or more fatal errors: 1 errors during the build process
Cleaning data and temporary directories... Done!


****** The app has now finished! ******

Try with the new version xeBuild GUI v2.052 by Swizzy

[rafilks]

\0/

I used xeBuild GUI v2.052 by Swizzy and worked fine!

thanks a lot to everybody.

Now I'll return to install the Matrix Glitch II.

[Nico-Arg]

Jejeje, sorry I didnt look at your log first

Glad to help, cheers my friend!