1) Copy vsh.self and reActPSN - v2.20.pkg to USB media.
2) Create an /exdata folder on dev_USB000 media and copy any downloaded .rap and .edat files into this folder. (must be dev_usb000 port-USB port closest to BD drive)
3) Plug USB media into USB port on the right.
4) Use multiMAN and go into MultiMAN Setup (multiMAN's XMB screen)
5) Enable the Write Access to /dev_flash option (located at the bottom in Settings column, if it isn't there, hit triangle and click on Advanced Settings)
6) Make a backup of your original vsh.self in case you mess up. (/dev_flash/vsh/module)
7) Now in multiMAN's File Manager copy the vsh.self file to /dev_blind/vsh/module (overwriting the old one)
8) Disable the Write Access to /dev_flash option then reboot your PS3. (don't reboot until you disable this option)
9) Install reActPSN - v2.20.pkg from Install Package Files.
10) Create a new user account on the PS3 and name is aa.
11) Now launch reActPSN, your PS3 will reboot and your aa user account will now be renamed to something like reActPSN 2.0.
12) You can now install your game .pkg's and they will be unlocked and ready to play.
If you want to add new games with new .rap/.edat files you'll need to log into the reActPSN 2.0 user account, rename it to aa
again, then launch reActPSN again so it grabs all your new .rap/.edat files.
Enjoy playing!
http://www.mediafire.com/?bd2na2qm0qddnb3 <- if these are actually patched for kmeaw, they should be all you need
If it doesnt work try running it again, i remember when i ran it the first time it didn't work properly, so run it 2x in a row
and see if that helps.









