360 Multi Builder for all Xbox360 Image Types

[M37R01D]

Hi rogero,

i have a falcon with cb5772
do you think it will be possible to make it work?
if you need a cb5772 nanddump or someone to test just tell me.

thank you

CB_5772 is also a 2-stage CB like CB_6752 / CB_4577 , not compatible for now.

maybe in your 0.3 version?

its not a limitation of the software that is the problem with CB 6752, and 5772 its a limitation of the hack which does not support it

if the hack evolves and gets coded to work on these CB versions adding to multi builder wouldnt be an issue

[Rogero]

360_Multi_Builder_v0.3.rar ( Clicked 8358 times )

360_Multi_Builder_v0.3 on 13/11/2011
----------------------------------------------------------------
- Updated Dashlaunch patches to latest version 2.26 / thanks cOz
- Added the option to build the image without Dashlaunch patches too.
- Added the option to build the Jtag image with SMC = AUD_CLAMP.
- Added full checks of different CB versions to the Xell/ECC script.
- Added RawFlash v3 / "xenon.elf" to "Data" folder with flashing note.
- Fixed the Fans Speed back to auto (it was 70% in previous version).

First page updated...

[M37R01D]

thanks for filling my request of the AUD_CLAMP fix
keep up the great work

[raiden]

Builded a jasper 16mbyte with 0.3 version, e53, back to version 0.2 no problems, rgh boots fine now...

BUG fix needed ?

[dewana]

kindly guide me how to make RGH image for slim

i have got from 360 flash tool these two files

SMC_dec.bin and SMC_enc.bin and i have pasted these two files in my360 dir. but still getting this error msg

i am getting these 2 error



first:

---------------------------------------------------------------

fcrt eXtractor v0.03 by BestPig

---------------------------------------------------------------

The filesize is incorrect.

Press <enter> to continue





and then

---------------------------------------------------------------

ggBuild v0.33.273

---------------------------------------------------------------



**** could not read smc.bin (-1) ****

******* ERROR: critical bootloader files are missing, cannot proceed!



***** FATAL BUILD ERROR: -1 unable to complete NAND image

---------------------------------------------------------------

ggBuild Finished. Have a nice day.

---------------------------------------------------------------

press <enter> to quit...



thanks for help in advance

[Rogero]

Builded a jasper 16mbyte with 0.3 version, e53, back to version 0.2 no problems, rgh boots fine now...

BUG fix needed ?

hello, please i need exact details of your build, the option used (with or without Dashlaunch patches) , Jtag or RGH ( I guess it's RGH, just want to make sure) so i can track the bug... thanks

The only thing changed in the RGH image build from version 0.2 are the Dashlaunch patches, nothing else changed.

[Rogero]

kindly guide me how to make RGH image for slim

i have got from 360 flash tool these two files

SMC_dec.bin and SMC_enc.bin and i have pasted these two files in my360 dir. but still getting this error msg

thanks for help in advance

hello, you need to place your nand dump in the folder "...Data\my360\" and rename it to "nanddump.bin" then run the program first time to create the Xell/ECC image, then after you run Xell ( the 360 glitch successfully ) you can save your CPU key to a file called "cpukey.txt" and place it with the "nanddump.bin" in "...Data\my360\" and run the program again so this time you can build the RGH image of the dashboard, then you follow the last instruction on how to flash it using "rawflash" from Xell.

[Rogero]

thanks for filling my request of the AUD_CLAMP fix
keep up the great work

I added this the very last minute with eyes almost closed
Please test it and confirm if it's working as it should.

[dewana]

kindly guide me how to make RGH image for slim

i have got from 360 flash tool these two files

SMC_dec.bin and SMC_enc.bin and i have pasted these two files in my360 dir. but still getting this error msg

thanks for help in advance

hello, you need to place your nand dump in the folder "...Data\my360\" and rename it to "nanddump.bin" then run the program first time to create the Xell/ECC image, then after you run Xell ( the 360 glitch successfully ) you can save your CPU key to a file called "cpukey.txt" and place it with the "nanddump.bin" in "...Data\my360\" and run the program again so this time you can build the RGH image of the dashboard, then you follow the last instruction on how to flash it using "rawflash" from Xell.

thanks for the answer i have made image wit this program for jasper which is working very well now i want to make for slim
i have copied nand in that dir and renamed to nanddump.bin and have the key too which i have saved too now when i start makeing image for slim i get these two error
smc.bin error and size error . kindly guide me how to fix them

[Rogero]

kindly guide me how to make RGH image for slim

i have got from 360 flash tool these two files

SMC_dec.bin and SMC_enc.bin and i have pasted these two files in my360 dir. but still getting this error msg

thanks for help in advance

hello, you need to place your nand dump in the folder "...Data\my360\" and rename it to "nanddump.bin" then run the program first time to create the Xell/ECC image, then after you run Xell ( the 360 glitch successfully ) you can save your CPU key to a file called "cpukey.txt" and place it with the "nanddump.bin" in "...Data\my360\" and run the program again so this time you can build the RGH image of the dashboard, then you follow the last instruction on how to flash it using "rawflash" from Xell.

thanks for the answer i have made image wit this program for jasper which is working very well now i want to make for slim
i have copied nand in that dir and renamed to nanddump.bin and have the key too which i have saved too now when i start makeing image for slim i get these two error
smc.bin error and size error . kindly guide me how to fix them

if you can upload your nanddump.bin + cpukey.txt I can check them to see what's wrong and try to build the image for you