• 360 Multi Builder for all Xbox360 Image Types • RGH - Tortuga Cove
    Register

    360 Multi Builder for all Xbox360 Image Types

    x360 Glitch Hack Discussion

    Moderator: Rogero

    { VISITS } Views: 195368  Favorites Favorites: 0  Followers Followers: 9 
    Followers: guerrierodipace, chapas, HiGhLaNdeR, rogmorax, viper831, morbidj, gnomx, Dicko316, psp_frank2
    Developer
    User avatar
    Posts: 599
    Joined: Mon Jul 04, 2011 11:07 am

    Has thanked: 335 times
    Been thanked: 1759 times
    Reputation point: 1397
    Sensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of Knowledge

    360 Multi Builder for all Xbox360 Image Types

    Postby Rogero » Sat Oct 22, 2011 6:26 am

    PS3 Developer Rogero and Tortuga-Cove Resident Has released an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images called "360 Multi Builder", check out the details below:

    360_Multi_Builder_v0.95a_Installer.exe ( Clicked 9537 times )

    360_Multi_Builder_v0.95a on 01/07/2012
    ------------------------------------------------------------------
    - Bug fixed in Xell/ECC build script that only affects new Xell image generation.
    - The 15574 Dash JTAG/RGH/RETAIL Images created with v0.95 are not affected at all.

    Thanks to Kombat_ac/Kombine for reporting about the bug.


    Capture.JPG
    Capture.JPG (61.81 KiB) Viewed 37131 times


    360_Multi_Builder_v0.95 on 23/06/2012
    ------------------------------------------------------------------
    - Updated xeBuild to v1.03.512 with support for Latest Dash 15574.
    - Updated Dashlaunch to latest version 3.02
    - Updated the ECC/Xell script to detect latest un-glitchable Boot-Loaders.
    - Added Trinity boot-loader ver 9231 to allow for 15574 Retail Image Creation.
    - To create 15574 Retail Images for other models latest BootLoaders must be added.
    - N.B:
    - - 15574 image creation is only possible with an already extracted CPU key.
    - - The ECC/Xell script cannot create a Xell image from a 15574 nand dump.


    360_Multi_Builder_v0.94_Installer.exe ( Clicked 5344 times )

    360_Multi_Builder_v0.94 on 10/05/2012
    ------------------------------------------------------------------
    - Updated xeBuild to v1.02.477 with support for FAT/14717/14719 consoles.
    - Updated Dashlaunch to latest version 3.00 beta.
    - Added Full RGH v2.0 support for FAT Dual CBs (4575,4576,4577,5772,5773,6752,6753)
    [All Credits to the Xecuter RGH team for defeating FAT Dual CBs]
    - Added an automated function to check the boot-loaders version and select the correct RGH version needed.

    - The WinXP compatible ".exe" is included in the installer
    -(for those who have the Antivir problem, you can delete it manually)

    Image

    Image

    Image

    Image


    360_Multi_Builder_v0.93_Installer.exe ( Clicked 6810 times )

    360_Multi_Builder_v0.93 on 15/03/2012
    ------------------------------------------------------------------
    - Added a window installer package for easier and automated installation/removal.

    - Updated the Menus to a better and easier to use versions.
    - You can start using the program simply by running the Shorcut from the Desktop.
    - You don't have to browse manually in order to add or remove any files anymore.
    - The program will do additional checks for missing "nanddump.bin" and "cpukey.txt"
    - The program will also open the required folder automatically when needed.

    - The WinXP compatible ".exe" is included in the installer
    -(for those who have the Antivir problem, you can delete it manually)

    Image

    Image

    Image

    Image



    360_Multi_Builder_v0.921 ( Clicked 1441 times )


    This is also a winXP compatible version of the main file "Run.exe" needed only in case the main release executable didn't work for you.
    N.B: you need to download the full version first, then get this file and use it instead of the original "Run.exe"

    360_Multi_Builder_v0.921 WinXP executable only ( Clicked 2030 times )


    360_Multi_Builder_v0.921 on 13/03/2012
    ------------------------------------------------------------------
    - Xenon ECC image is now built with 2 different Donor CBs automatically:
    CB_1940 and CB_7375(user can test which Image works best for his Xenon)


    Image

    360_Multi_Builder_v0.92 ( Clicked 1401 times )

    360_Multi_Builder_v0.92 WinXP executable only ( Clicked 767 times )

    360_Multi_Builder_v0.92 on 12/03/2012
    ----------------------------------------------------------------
    - Added the option to choose between 3 Dash versions (13604/14699/14719)


    360_Multi_Builder_v0.91 ( Clicked 1412 times )

    360_Multi_Builder_v0.91 on 11/03/2012
    ----------------------------------------------------------------
    - Bug Fixed (Problem with the smc.bin file) Thanks LordX for reporting.

    - Added Xenon support for both Xell/ECC and RGH builds. (Credits to Team-Xecuter)

    - Added Jasper 16MB small Block support (config 01198010) to Jasper 16MB build options.
    (This must be used only with some rare Jasper consoles with Nand Controller Config 01198010)

    - Added the option to build Slim/Trinity RGH image with FCRT check Disabled.
    (This is needed in rare scenarios,example: using FAT drive to swap Slim non-Flashable drive)

    - Added full SMC hacks to JTAG builds (AUD_CLAMP, AUD_CLAMP+TRAY_OPEN and CYGNOS360)

    - Added latest xell v0.991 to ECC image creation (already added before to RGH/JTAG images)

    - Changed the main executable package to avoid the false positive problems with "Antivir"

    - Changed the Folders Organization to prevent any accidental files deletion
    (Now the User have to work with only one folder "Data\_my_images\" to add/remove files)

    - The Program now uses a Full CB Compatibility Table to check the CB for JTAG/RGH compatibility.

    - Replaced the Python Script responsable for ECC creation with a proper executable.

    Image


    360_Multi_Builder_v0.83 ( Clicked 2396 times )

    360_Multi_Builder_v0.83 on 06/03/2012
    ----------------------------------------------------------------
    - Added Support for building ECC image for Slim/Trinity updated to Dash 14717/14719 (CB9230)
    - Updated DashLaunch to latest version 2.32 (Respect to c0z for his great work and it's so sad indeed to see him leave).

    Image


    360_Multi_Builder_v0.82 ( Clicked 4067 times )

    360_Multi_Builder_v0.82 on 26/02/2012
    ----------------------------------------------------------------
    - Bug Fix only for Retail image building (Dual-Boot users), other functions are not affected.



    360_Multi_Builder_v0.81 ( Clicked 1249 times )

    360_Multi_Builder_v0.81 on 25/02/2012
    ----------------------------------------------------------------
    - Added Support for building images of latest Dash ver 2.0.14719
    - Updated Dashlaunch to latest version 2.31
    - Added the updated bootloaders for building 14719 Retail Images.
    * Please note that Retail Images may need to increment "CF LDV" value
    by 1 of the original value manually from the options.ini file.
    - Updated the Instruction Page with additional details.

    Credits to xeBuild / Dashlaunch devs, especially cOz.

    Image



    360_Multi_Builder_v0.8 ( Clicked 3871 times )
    360_Multi_Builder_v0.8 on 22/02/2012

    ----------------------------------------------------------------
    - Removed the CB Labels on Main Menu to eliminate any RGH/Jtag confusion.
    - Updated xeBuild to v1.01 with support for Dashboard 14717.
    - Updated Dashlaunch to latest version 2.30
    - Updated Rawflash to v4 (xenon.elf in folder ..\Data) for better Flashing.
    - Updated Xell-Reloaded to Xell Reloaded v0.991 with built in RawFlash v4.
    - Updated Flashing Instruction for proper operations with RawFlash.
    - FreeStyle Dash is set to boot as the Default Dash with default "launch.ini"

    Credits to xeBuild / Dashlaunch devs, especially cOz.

    Image

    360_Multi_Builder_v0.7.rar ( Clicked 12416 times )

    360_Multi_Builder_v0.7 on 11/12/2011
    ----------------------------------------------------------------
    - Added a default "launch.ini" to Flash when image is created with Dashlaunch.
    * Button_A=Hdd:\FSD\default.xex , default=Usb:\FSD\default.xex , rest=default
    * No more need to run the Dashlaunch Installer on 360 at all after flashing the image.
    - Added the option to auto-build custom "launch.ini" per user preference.

    Credits to xeBuild / Dashlaunch devs, especially cOz.
    Credits to ir0nman for this usefull tool : "buildini.exe"


    Image

    Image

    Image


    360_Multi_Builder_v0.6.rar ( Clicked 2647 times )

    360_Multi_Builder_v0.6 on 10/12/2011
    ----------------------------------------------------------------
    - Removed the pre-patched RGH smc files that were used in version 0.5
    - Now using xeBuild to patch the RGH/smc files for better RGH images compatibility.


    360_Multi_Builder_v0.5.rar ( Clicked 3261 times )

    360_Multi_Builder_v0.5 on 09/12/2011
    ----------------------------------------------------------------
    - Added Support for xeBuild and latest Dashboard version 14699.
    - Updated patches to Latest Dashlaunch v2.27 Patchset.
    - now using xeBuild built-in "fcrt.bin" extractor for Trinity images.
    - Added RGH smc files for proper RGH image building.
    - Added Xenon Retail Image build option.


    360_Multi_Builder_v0.4.rar ( Clicked 6856 times )

    360_Multi_Builder_v0.4 on 27/11/2011
    ----------------------------------------------------------------
    - Returned to using Dashlaunch v2.25 patch-set to avoid the "PlayDVD" problem
      with some Liteon Drives that requires the fcrt.bin for proper function.
    - Fixed a bug in the Xell/Ecc script regarding Jaspers with CB version 6751.

    Credits to ggbuild/fbbuild/freeboot/360FlashTool/Dashlaunch & Rawflash teams and devs.
    Credits and big thanks to BestPig for sharing his awesome fcrt_extractor.exe program.


    Image

    Image

    Image

    Image


    360_Multi_Builder_v0.3.rar ( Clicked 8935 times )

    360_Multi_Builder_v0.3 on 13/11/2011
    ----------------------------------------------------------------
    - Updated Dashlaunch patches to latest version 2.26 / thanks cOz
    - Added the option to build the image without Dashlaunch patches too.
    - Added the option to build the Jtag image with SMC = AUD_CLAMP.
    - Added full checks of different CB versions to the Xell/ECC script.
    - Added RawFlash v3 / "xenon.elf" to "Data" folder with flashing note.
    - Fixed the Fans Speed back to auto (it was 70% in previous version).


    360_Multi_Builder_v0.2.rar ( Clicked 6743 times )

    360_Multi_Builder_v0.2 on 03/11/2011
    ----------------------------------------------------------------
    - Added Proper Support for Jasper with CB 6751 (where a donor CB 6750 will be used)
    - Please note that Jasper with CB 6752 are not Glitchable even if the image was created
    - Added Proper Support for Zephyr with CB 4578 (Program now supports both 4578 & 4579)
    - Added a notification to the Python Script about the Falcon CB 5772 being not Glitchable

    Image

    Image

    Image


    360_Multi_Builder_v0.1.rar ( Clicked 6810 times )

    360_Multi_Builder_v0.1 on 31/10/2011
    ----------------------------------------------------------------
    - Updated "Easy ggBuilder" to "360 Multi Builder" with ECC/Jtag/Glitch & Retail image creation.
    - Added Auto-Build ECC Glitch image "image_00000000.ecc" when "cpukey.txt" is missing.
    - Added startup checks for "nanddump.bin" and "cpukey.txt" files existence.
    - Jtag/Freeboot 13604 image creation with built-in Dashlaunch v2.25 patches & Xell-Reloaded.
    - Glitch Hack 13604 image creation with built-in Dashlaunch v2.25 patches & Xell-Reloaded.





    Easy_ggBuild_v0.4_Final ( Clicked 32938 times )

    This is a noob-friendly version of the ggBuild 0.33 Glitch Image builder, it has all the necessary files needed to create a Glitch Image of the Dash version 13604 using a simple User Interface which allows the user to choose his console type and does the rest of the process automatically.

    The user just needs to supply 2 files ,his nand image as "nanddump.bin" and the CPU key as "cpukey.txt". Place both files in the folder "Data\my360" ,the glitch image will be created as "updflash.bin" in the folder "Data".

    v0.4 Final Changelog on 26/10/2011
    ---------------------------------------------------------------------------------
    - Updated BestPig's "fcrt_extractor" to version 0.3
    - Eliminated one step from the Trinity image creation for simpler operation

    This is the Final Version, no more updates are necessary.

    v0.3 Changelog on 25/10/2011
    -------------------------------------------------------------------------------------------
    - Added BestPig's fcrt_extractor which allows auto-extracting of "fcrt.bin/fcrt.bin.meta",
    no more need for manual extracting of the 2 files using "360 Flash Dump Tool" for Trinity.

    The Program is now considered fully automated for all console types including Trinity.

    v0.2 Changelog on 24/10/2011
    ---------------------------------------------------------------------------------
    - Removed Xenon type from selection Menu
    - Added Trinity notification about "fcrt.bin" and "fcrt.bin.meta" files needed for some Slim nands.
    - Added 360 Flash Tool v0.97 to package with the ability to auto-launch it when needed.
    - Added the option to build Dash 13604 Retail Images
    - Added different menu selection checks to avoid wrong user input

    Image

    Image

    Image

    Image

    Image
    It is not the years in your life that count. It is the life in your years.

    Site Admin
    User avatar
    Posts: 464
    Joined: Thu Jun 30, 2011 5:53 am

    Has thanked: 18 times
    Been thanked: 289 times
    Reputation point: 180
    NoviceNovice

    Re: Easy ggBuild Version For Building Reset Glitch Hack Imag

    Postby condorstrike » Sun Oct 23, 2011 2:14 am

    EPICNESS above....:D, thanks Rogero, again.
    CAW!

    Member
    Random avatar
    Posts: 16
    Joined: Wed Nov 02, 2011 12:05 pm

    Has thanked: 3 times
    Been thanked: 8 times
    Reputation point: 5
    Novice

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby guerrierodipace » Wed Nov 02, 2011 12:10 pm

    great tool,thanks Rogero
    is possible to know if in the future implemented the NandPro 3 for backup and write the nand?

    thanks a lot for your work :D

    Member
    Random avatar
    Posts: 5
    Joined: Wed Nov 02, 2011 11:27 pm

    Has thanked: 0 time
    Been thanked: 4 times
    Reputation point: 0
    Newbie

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby aibo99 » Thu Nov 03, 2011 1:13 am

    Hi,

    I have a Zephyr with CB 4578. I used 360_Multi_Builder_v0.2 to generate the NANDs for multiple times.

    However, the md5 of the generated NANDs are different among them. It seems that the generated NANDs are not identical even from the same nanddump.bin. Why ?

    Thanks.

    Developer
    User avatar
    Posts: 599
    Joined: Mon Jul 04, 2011 11:07 am

    Has thanked: 335 times
    Been thanked: 1759 times
    Reputation point: 1397
    Sensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of Knowledge

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby Rogero » Thu Nov 03, 2011 4:27 am

    aibo99 wrote:Hi,

    I have a Zephyr with CB 4578. I used 360_Multi_Builder_v0.2 to generate the NANDs for multiple times.

    However, the md5 of the generated NANDs are different among them. It seems that the generated NANDs are not identical even from the same nanddump.bin. Why ?

    Thanks.


    That's normal, the ecc bytes will be re-calculated each time, and the image hashes done by ggbuild/fbbuild will never be the same too.

    Did your Zephyr with CB version 4578 image work fine with latest 360 Multi Builder v0.2 ?
    It is not the years in your life that count. It is the life in your years.

    Member
    Random avatar
    Posts: 5
    Joined: Wed Nov 02, 2011 11:27 pm

    Has thanked: 0 time
    Been thanked: 4 times
    Reputation point: 0
    Newbie

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby aibo99 » Thu Nov 03, 2011 4:32 am

    Rogero wrote:
    aibo99 wrote:Hi,

    I have a Zephyr with CB 4578. I used 360_Multi_Builder_v0.2 to generate the NANDs for multiple times.

    However, the md5 of the generated NANDs are different among them. It seems that the generated NANDs are not identical even from the same nanddump.bin. Why ?

    Thanks.


    That's normal, the ecc bytes will be re-calculated each time, and the image hashes done by ggbuild/fbbuild will never be the same too.

    Did your Zephyr with CB version 4578 image work fine with latest 360 Multi Builder v0.2 ?


    Hi, Rogero,

    Thank you for your reply.

    I shall try to flash the generated NAND tonight and let you know the result asap.

    Previously, I used the v0.1 version to generate the NAND, however, my Zephyr (CB4578) only shows a green light and never boots up (black screen).

    Developer
    User avatar
    Posts: 599
    Joined: Mon Jul 04, 2011 11:07 am

    Has thanked: 335 times
    Been thanked: 1759 times
    Reputation point: 1397
    Sensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of Knowledge

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby Rogero » Thu Nov 03, 2011 4:52 am

    aibo99 wrote:Hi, Rogero,

    Thank you for your reply.

    I shall try to flash the generated NAND tonight and let you know the result asap.


    i'll be waiting your confirmation :)

    Previously, I used the v0.1 version to generate the NAND, however, my Zephyr (CB4578) only shows a green light and never boots up (black screen).


    v0.1 didn't have CB 4578 support and it always created the zephyr image with CB 4579 (reason for the image not booting on your zephyr),
    v0.2 now supports both CB versions 4578/4579 for zephyr.
    It is not the years in your life that count. It is the life in your years.

    Member
    Random avatar
    Posts: 5
    Joined: Wed Nov 02, 2011 11:27 pm

    Has thanked: 0 time
    Been thanked: 4 times
    Reputation point: 0
    Newbie

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby aibo99 » Thu Nov 03, 2011 9:05 am

    Hi, Rogero,

    360_Multi_Builder_v0.2 works perfect and the glitch image for my Zephyr (CB 4578) is perfect too.

    My Zephyr boots instantly after I press the power button.

    Now I can run Xexmenu and play JTAG games, just like I play games in my another JTAG Freeboot console.

    Bingo !

    Thanks again for your hard work in the Multi Builder development.

    Developer
    User avatar
    Posts: 599
    Joined: Mon Jul 04, 2011 11:07 am

    Has thanked: 335 times
    Been thanked: 1759 times
    Reputation point: 1397
    Sensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of KnowledgeSensei of Knowledge

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby Rogero » Thu Nov 03, 2011 4:42 pm

    aibo99 wrote:Hi, Rogero,

    360_Multi_Builder_v0.2 works perfect and the glitch image for my Zephyr (CB 4578) is perfect too.

    My Zephyr boots instantly after I press the power button.

    Now I can run Xexmenu and play JTAG games, just like I play games in my another JTAG Freeboot console.

    Bingo !

    Thanks again for your hard work in the Multi Builder development.


    Thank you so much for the confirmation, because I added the CB_4578 support without having any dump or console to test with,
    I'm so glad it worked for you :)

    Cheers
    It is not the years in your life that count. It is the life in your years.

    Member
    Random avatar
    Posts: 6
    Joined: Thu Nov 03, 2011 5:00 pm

    Has thanked: 0 time
    Been thanked: 6 times
    Reputation point: 0
    Newbie

    Re: 360 Multi Builder for all Xbox360 Image Types

    Postby asapreta » Thu Nov 03, 2011 5:02 pm

    I got an Zephyr (Refurbished) that has CB 4577.
    Anything can be done?

    Next

    Return to RGH

    Who is online

    Users browsing this forum: No registered users and 1 guest