PS3 Nor Dump Auto-Patcher v0.01 by Rogero

[Rogero]

PS3_Nor_Dump_Auto_Patcher_v0.01.rar ( Clicked 4857 times )

N.B:
Always make several Nor Dumps and Validate your dump properly before proceeding to patch it and Flash it back.
This Link have all the info needed to validate the Dump --> PS3 DevWiki, Validating flash dumps
A Ps3 without a valid Nor/Nand Dump is non-recoverable.


PS3 Nor Dump Auto-Patcher v0.01 by Rogero 11/Aug/2012
----------------------------------------------------------------------------------------------------------------
- Compatible with both E3 and ProgSkeet Nor dumps.
- Checking your PS3 Nor Dump if it is Byte-Reversed or No.
- Applying the correct downgrade patches depending on the Dump type detected.
- Eliminating the need to byte-swap the dump in order to apply the patches.
- Making the patching easier rather then using several programs to do it.

[Nico-Arg]

Thanks!!

[b3wii]

thank you Rogero

[ichris26]

I am having an issue getting this to work. Here is what I get when trying it...




BTW, I do have the dump in the folder with the .Exe

[oceansoul]

I also have that error on my PC with Xp windows with windows 7 working great !

Great tools rogero thanks for this !

[Jimy]

thanks rogero. Can I ask you a question? I pulled out the bios of my ps3, so she checked out the ps3 with e3 normal dump checker, everything went right. Then I see that the dump was corrupt: (How can I restore it I have it corrupted? This program does that?

[oceansoul]

I always make 5 or 6 dumps with reboot consoles and check tham with nor checker from e3 flasher site and with flowrebuild if you unpack without errors dump is ok

[Jimy]

was previously with 3 beeps, hang up. Then I managed to make the solder point on the board and in the tristate EBS on e3 flasher came into FLASH so fun, I managed to restore the dump, only gives black screen, does not recognize usb, but the ps3 league, and connects to the control. Do you have any solution for this? I have my dump upada, if you want I'll pass. Follow the link of it. http://www.4shared.com/file/wYz90m7G/bkpps3.html

I am not able to open the dump Nor auto patcher: S
he says he has to put the dump file in there, but I've already put. I put in the date folder and file pro own. Exe. Anyone have any solution?

[windrider]

Perhaps Rogero will have a look at your dump.

[Rogero]

was previously with 3 beeps, hang up. Then I managed to make the solder point on the board and in the tristate EBS on e3 flasher came into FLASH so fun, I managed to restore the dump, only gives black screen, does not recognize usb, but the ps3 league, and connects to the control. Do you have any solution for this? I have my dump upada, if you want I'll pass. Follow the link of it. http://www.4shared.com/file/wYz90m7G/bkpps3.html

I am not able to open the dump Nor auto patcher: S
he says he has to put the dump file in there, but I've already put. I put in the date folder and file pro own. Exe. Anyone have any solution?

Hello, i have checked your not dump and it's missing half the data from the file, the boot-loaders are also missing so this dump even if patched won't be able to boot your Ps3.

I hope you have an old backup somewhere or else you may not be able to fix the Ps3.