• PS3 Flash Tool v4.55 (by Swizzy & Rogero) • Page 3 • Rogero - Tortuga Cove
    Register

    PS3 Flash Tool v4.55 (by Swizzy & Rogero)

    Moderators: Rogero, bitsbubba

    { VISITS } Views: 180735  Favorites Favorites: 2  Followers Followers: 6 
    Favorites: grubby, psp_frank2
    Followers: ROOKI3, reevester, studiovpc, Minus, Robertlob, qai9ahrq4c4
    Member
    Random avatar
    Posts: 3
    Joined: Sat Oct 27, 2012 4:25 pm

    Has thanked: 0 time
    Been thanked: 2 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby Domain » Fri Mar 29, 2013 12:00 pm

    Rogero i did follow everything that's why i dont understand what went wrong :/ with the older patcher i just used the same dump that i had and everything went fine




    Rogerio eu segui tudo como tu mandaste no tutorial por isso é que nao entendo o que correu mal :/ com o patcher antigo apenas tive que usar a mesma dump que tinha e tudo correu as mil maravilhas

    Ja agora belo trabalho que tens feito pela comunidade PS3 muito obrigado!!

    Member
    Random avatar
    Posts: 5
    Joined: Thu Mar 28, 2013 6:18 pm

    Has thanked: 0 time
    Been thanked: 11 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby Yoshee » Fri Mar 29, 2013 3:26 pm

    Hello !

    So, if i understand, now with this version, i patch my dump, and i insert it with my hardware flasher.
    After, just insert USB key with PS3UPDAT.PUP (CFW 4.40 Rogero) and LVdiag.self and it copy it ?

    An other question...
    Why 2 patch now ? Before, that was 3 patch ? ;)

    Member
    User avatar
    Posts: 10
    Joined: Tue Oct 23, 2012 4:49 am

    Has thanked: 0 time
    Been thanked: 3 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby tripod731 » Fri Mar 29, 2013 3:59 pm

    For Me the best way to install this CFW is:

    1. Install 4.40 OFW
    2. Then with flasher & patcher flash .bin back.
    Done.

    Member
    Random avatar
    Posts: 4
    Joined: Mon Jan 02, 2012 3:21 pm

    Has thanked: 0 time
    Been thanked: 4 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby Sh4n » Fri Mar 29, 2013 6:27 pm

    Thank you Rogero for this TOOL.
    Great job !
    I tested cech-2504 and cech 2004 and it works fine!

    Member
    Random avatar
    Posts: 3
    Joined: Thu Mar 28, 2013 5:38 pm

    Has thanked: 0 time
    Been thanked: 2 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby thiagopastre » Fri Mar 29, 2013 8:10 pm

    Rogero,

    What about the 3k consoles with 3.60+? Can I use this tool to patch de NOR dump e apply directly without downgrade?
    If not.. in a not so distant future.. will these consoles be able to downgrade?
    Thanks and congratilations for the wonderfull work!!

    Member
    Random avatar
    Posts: 12
    Joined: Mon Jan 14, 2013 1:42 pm

    Has thanked: 1 time
    Been thanked: 5 times
    Reputation point: 5
    Novice

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby playonlcd » Sat Mar 30, 2013 2:11 am

    Hi,

    This method simplifies the downgrade procedure if you dont have a dongle.
    Question remains, with this method qa_toggle can be set?
    I know that qa_toggle runs only on 3.55 so installing directlly 4.40 means that dehashing is not done and installing a firmware with LV1 checks leads to brick.


    thiagopastre
    Consoles that come with 3.55, metldr2 from factory cannot be downgraded/modded right now. Cobra was promising the bluray emulator, but it seems they are delaying, meaning is not exist or not working on all consoles.

    HBIC
    User avatar
    Posts: 3426
    Joined: Sun Jul 17, 2011 7:11 pm
    Location: Alberta

    Has thanked: 1540 times
    Been thanked: 2159 times
    Reputation point: 663
    SkilledSkilledSkilledSkilledSkilledSkilledSkilled

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby windrider » Sat Mar 30, 2013 2:21 am

    playonlcd wrote:Hi,

    This method simplifies the downgrade procedure if you dont have a dongle.
    Question remains, with this method qa_toggle can be set?
    I know that qa_toggle runs only on 3.55 so installing directlly 4.40 means that dehashing is not done and installing a firmware with LV1 checks leads to brick.


    QA Flag is set by default in Rogero 4.40 v1.02
    If we all are here to help others , then what exactly are others here for?

    ImageImage

    Forum rules

    Member
    Random avatar
    Posts: 13
    Joined: Sat Mar 30, 2013 4:48 am

    Has thanked: 0 time
    Been thanked: 5 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby david » Sat Mar 30, 2013 5:09 am

    Dear Rogero,

    Can you help me out..?

    i have a fat PS3 OFW 4.40 (COK-002 board NAND) I dump both NAND en verify everthing is fine..
    I patch te dump file afther rebuild it with Flowrebuild so far so good...

    than i make a split, back in 2 NANDS for flashing back to the ps3.

    Flashing back the NANDS everything go fine.

    Rebuild the ps3 with HDD in it turn the power ON and the PS3 turning off....? afther 10 sec. and black screen.. :? no beep.

    So it is NO brick...? because I can go in safe mode holding de power button wait on the 2 beeps. I go to update firmware and the PS3 update again to OFW 4.40

    Please can you help me out..?

    Regards David

    Member
    Random avatar
    Posts: 10
    Joined: Sun Nov 25, 2012 4:12 am
    Location: denmark

    Has thanked: 4 times
    Been thanked: 12 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby jensen76 » Sat Mar 30, 2013 7:07 am

    david wrote:Dear Rogero,


    Rebuild the ps3 with HDD in it turn the power ON and the PS3 turning off....? afther 10 sec. and black screen.. :? no beep.

    So it is NO brick...? because I can go in safe mode holding de power button wait on the 2 beeps. I go to update firmware and the PS3 update again to OFW 4.40

    Please can you help me out..?

    Regards David



    if the consol can update to officiel 4.40 again why dont you try to use rogero 4.40 v1.02 instead of officiel 4.40? my gues is that its working that way...

    Member
    Random avatar
    Posts: 13
    Joined: Sat Mar 30, 2013 4:48 am

    Has thanked: 0 time
    Been thanked: 5 times
    Reputation point: 0
    Newbie

    Re: PS3 Nor and Nand Auto Patcher v0.04

    Postby david » Sat Mar 30, 2013 7:41 am

    jensen76 wrote:
    david wrote:Dear Rogero,
    Can you help me out..?

    i have a fat PS3 OFW 4.40 (COK-002 board NAND) I dump both NAND en verify everthing is fine..
    I patch with new PS3 Nor and Nand Auto Patcher v0.04 ,te dump file after rebuild it with Flowrebuild so far so good...

    than i make a split, back in 2 NANDS for flashing back to the ps3.

    Flashing back the NANDS everything go fine.


    Rebuild the ps3 with HDD in it turn the power ON and the PS3 turning off....? afther 10 sec. and black screen.. :? no beep.

    So it is NO brick...? because I can go in safe mode holding de power button wait on the 2 beeps. I go to update firmware and the PS3 update again to OFW 4.40

    Please can you help me out..?

    Regards David



    if the consol can update to officiel 4.40 again why dont you try to use rogero 4.40 v1.02 instead of officiel 4.40? my gues is that its working that way...


    Hello,

    I try that way it not working...? I get a error 8002F2C5

    PreviousNext

    Return to Rogero

    Who is online

    Users browsing this forum: Bing [Bot] and 3 guests